- November 15th, 2020, 8:27 pm#4942235
Hey guys will the acrylic tube sold in the store fit a throwing chicken wand?
- November 16th, 2020, 10:43 am#4942260
If everything on his kits is full size, then it should. As long as it says 1:1 scale you're good to go!
- November 16th, 2020, 12:26 pm#4942268
I have the wand tip from the store in my TC thrower. There is a little wiggle room in the aluminum pipe, so I have one layer of electrical tape wrapped around the base of the tip which holds it in snuggly. You could epoxy/glue it for a permanent fit.
Suck in the guts guys... We're the Ghostbusters!
- November 17th, 2020, 12:23 am#4942307
Also if the one in the shop is a little loose in the Throwing Chicken wand you might be able make some sort of adapter or sleeve so it can slide in and out or attached to a pop mechanism.
Magnoli Clothiers BOOTS: Work in Progress
- By Indy MagnoliYou can see our Paranormal Boots in action here: […]
- By GuyXI was one of those kids who was scared of his own […]
- By kahuna900
- By UncannyGirlThe opening post contain a lot information. Quick […]