- August 6th, 2020, 9:18 am#4937911
Modded the Spirit goggles to look more like the real ones. I used button snaps from Amazon, knobs from gbfans shop, sticker set from Independent1Trading on etsy, and sewed my own strap mounts. (Not very well though)
Right side
Left side
I cut a piece of aluminum to make the lens screw bracket.(Front left lens) Couldn't find longer thumb screws but close enough.
Front
I replaced the green led in the lens and added one to the other lens. Dimmed them down so I didn't go blind. I used plastic card and filler to make the raised ring on the front.
Bottom
I built a different battery door(the round one) to look more realistic and used a mini push button for the switch. Might mod this to look like the real push/pull switch later.
Top
Added a flashing led for effect and to indicate power.
Right
Left
Right side
Left side
I cut a piece of aluminum to make the lens screw bracket.(Front left lens) Couldn't find longer thumb screws but close enough.
Front
I replaced the green led in the lens and added one to the other lens. Dimmed them down so I didn't go blind. I used plastic card and filler to make the raised ring on the front.
Bottom
I built a different battery door(the round one) to look more realistic and used a mini push button for the switch. Might mod this to look like the real push/pull switch later.
Top
Added a flashing led for effect and to indicate power.
Right
Left