Page 18 of 28
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 1:00 pm
by 35FT_TWINKIE
Mat wrote:Less Talky.
Anybody else read that in Adam Sandler's voice?
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 5:58 pm
by PssdffJay
A questions if you please:
The ion arm end caps. I never realized this before, but they are painted black with minimal weathering for GB1 and the rod out the bottom is painted black too correct?
I noticed this today reading Julz's build and though maybe this was just on the Omni pack. It looks like in GB2, they weathered them more and removed the black paint from the rod.
Have I understood this correctly?
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 6:01 pm
by 35FT_TWINKIE
Yes. That is correct.
However, this particular part is probably the one thing that people are most flexible on, as far as compromising screen accuracy.
Most popular choice seems to be to leave the rod completely Unpainted and the block either completely unpainted, or heavily weathered.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 7:06 pm
by thebigone2087
35FT_TWINKIE wrote:
Most popular choice seems to be to leave the rod completely Unpainted and the block either completely unpainted, or heavily weathered.
+1
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 7:23 pm
by PssdffJay
Good good. Thanks. That's the way I like the look anyway.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 7:41 pm
by pyhasanon
I'm thinking of keeping it clean, it really seems to be up to the builder's preference....
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 8:23 pm
by halliwax
just wanted to say thanks jay, your threads really help me out. allot of my questions are answered without me asking and you have the pictures to help clear it up.
thanks for all your help in your PMs too.
N-filter down, looks super good!
i like your "ugly" weld as well!
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 10:37 pm
by PssdffJay
Anytime. I wasn't an expert when I first got here and I'm still not even close but I hope that my ramblings and questions will help future generations.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 10:45 pm
by PssdffJay
I ended up having to stay at my office late so I lost a lot of the afternoon. I got home at about 7:30 and did lots of sanding. LOTS of sanding! I feel like Quagmire after he discovered the internet. I just finished now.
I finished sanding my bumper and then I started in on the shell. This so far has been my least favourite part of the build. I had lots of air bubbles under the gel coal break along the sharp corners of the fins and the plating and a doozie on the corner of the piece that you mount the PPD to. Can't think of the name. I'll post some photos shortly, it's currently drying after I washed it. It's a good thing this happened now and not later. At least I can fill them tonight, quick sand tomorrow morning and then on to paint.
Sunday and Monday to paint. Tuesday to assemble. Wednesday is the screening. Is this doable? I don't know. I've never painted anything like this before. I don't know how long it will take to dry.
Stay tuned. We'll find out!
Oh and I finally cut out the mouse hole for the thrower loom. It was actually pretty easy. I'll post photos in a bit.
PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 9th, 2014, 10:46 pm
by PssdffJay
Sonofa tapatalk!!!
Duplicate post!!Argh!
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 10th, 2014, 10:48 am
by 35FT_TWINKIE
Tapatalk strikes again!!! Mwahahahahahaha!!!
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 10th, 2014, 2:02 pm
by PssdffJay
Anyone know how long to wait between primer and then paint?
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 10th, 2014, 2:04 pm
by Venkman's Swagger
24 hours is your best bet or until at least the following day mate
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 2:39 am
by PssdffJay
Some photos for you.
The loom hole.
The chipping I had to fix on the shell.
There was a lot more but I won't kill you with photos. There were a few I noticed today after priming so we'll see how it looks after the paint is all dry.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 2:46 am
by PssdffJay
Today I started on the paint. I had to sand all the Apoxie sculpt off from fixing up the chips last night. I borrowed my friends garage for this.
The n filter is taped off for now.
Many coats of grey primer.
Now I did take a chance and and went right to the painting after this. I have it 1 hour after the last coat of primer and then I taped off the parts I wanted untextured.
Somewhere in there I started to prime the bumper and booster frame.
And I started using this paint on the aluminum parts.
I hate those nozzles.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 2:53 am
by PssdffJay
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 3:00 am
by PssdffJay
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 3:05 am
by PssdffJay
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 4:41 am
by pyhasanon
I can see the texture, it's very subtle... I kinda like it, but it doesn't necessarily pop out either... really depends on how you want it to look, I guess...
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 5:04 am
by bishopdonmiguel
You're doing do great work under pressure! Wanna paint mine?
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 6:40 am
by 35FT_TWINKIE
Looking good, Jay.
This is winning.
Charlie Sheen would be proud.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 7:25 am
by thebigone2087
Looks great, bud. Now get all those fancy pieces attached! This pack will look great!
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 10:13 am
by NoodleMaps
Looks GREAT!! Makes me wish I went with the Hammered look now.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 12:02 pm
by 35FT_TWINKIE
I'm really curious to see how the hammered finish turns out. People usually complain about the nozzled version of the cans like you are using.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 1:09 pm
by PssdffJay
bishopdonmiguel wrote:You're doing do great work under pressure! Wanna paint mine?
I ain't painting nothin'! My finger still hurts! Seriously, I think it's swollen. Here is my can total:
2 cans of primer, 1/2 can hammered, and 6 black. If it's worth doing, it's worth overdoing!
Thanks for all the feed back today. Nothing crackled or orange peeled so that's a plus! It's sitting out in the sun right now, it's going to be 30 degrees today. I picked a lucky 2 days to paint because our weather had been crappy and rainy for 2 weeks.
I'll post some more close ups later in better light, but I think the texture you're seeing is from the original texture to the shell. I honestly can't tell the difference from where I masked off parts. Don't get me wrong, I'm happy with it, but it doesn't have that nice texture I've seen before.
It does look pretty shiny right now. I tried looking last night but I couldn't find the threads on wiping it with a micro fiber cloth and or 0000 steel wool. Anyone remember or have any tips? I don't quite have time to start experimenting and then repaint if I'm assembling for Wednesday.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 1:11 pm
by PssdffJay
NoodleMaps wrote:Looks GREAT!! Makes me wish I went with the Hammered look now.
I wonder if the aluminum paint or metal paint you used is having anything to do with it. Just a guess, I have no idea. It could be a lot of reasons.
You could strip it down and repaint!
I hope you have some updates on your thrower because I haven't started mine yet. I need something to follow!
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 1:14 pm
by PssdffJay
35FT_TWINKIE wrote:Looking good, Jay.
This is winning.
Charlie Sheen would be proud.
Hahaha! That's because I primed it with tiger blood!! Mua ha ha!!!
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 1:30 pm
by PssdffJay
While I sit here and watch paint dry...
... I figured I would come up with a way to attach my Matty thrower. Whoa! Stop yelling!! It's only for 1 day!
A trip to the depo and I got some parts.
A 1 1/2" x 2" piece of PVC coupling or something, a screw in piece, and tenge dowel I already had from earlier in the build. The vaccine line is what gave me the idea. The PVC doesn't have threads on the inside, that's ok, I have a plan!
I cut about 1/2" off the PVC because it thought it was too long.
Then I drilled and tapped (crookedly of course) a 1/4-20 screw into the dowel and a hole through the piece with the threads.
The piece with the threads had a solid bottom and was hollow on the inside so the dowel fits right it perfectly.
The I put the threaded piece in the PVC piece and figured I would use 2 6-32 screws and tap those. I wanted it to look like it fits the ghostbuster theme.
And attached to the thrower. It all holds really tight with compression.
And I lied about painting. I'm painting it right now.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 1:33 pm
by robpenfold
Watching paint dry...that's what I used to do for a living. Really I did. I worked for a paint manufacturer.
Re: PssdffJay's Proton Pack Build (Pic Heavy)
Posted: August 11th, 2014, 1:38 pm
by NoodleMaps
PssdffJay wrote:NoodleMaps wrote:Looks GREAT!! Makes me wish I went with the Hammered look now.
I wonder if the aluminum paint or metal paint you used is having anything to do with it. Just a guess, I have no idea. It could be a lot of reasons.
You could strip it down and repaint! I hope you have some updates on your thrower because I haven't started mine yet. I need something to follow!
This could of been a factor for sure. When I went up to the Lego store sale for the Ecto-1 I took notice of the different techs' used in everyone's packs. Each one was very different when you took a close look at them and I found this to be very comforting. I didn't want to discourage you from following that method, really wanted to show what happened to me after a month. It isn't horrible just needed you to be aware of what could happen.
As for the thrower, I am so excited about this. Bought a bunch of stuff. Waiting for that to arrive. Lots of little doodles and drawings were made figuring out how to create the extending tip using a solenoid. Should be much fun!