Page 1 of 2

My newly created Proton Pack kits

Posted: September 17th, 2020, 2:34 am
by azuma
Hi guys,

My name is Azuma. I registered and became a member here in 2016, the same year I got my first back built, and I had my second one built in 2018. Both of my packs are equipped with Matty wand. For some reason, I am not satisfied with my both packs, so earlier this year I decided to commission someone to create a proton pack 3D model so that I can have my idealized pack made.

My pack is based on the measurements from Stefan’s plan with few correction, and the inside of the pack is made to my design. Because of my previous pack building experience, this pack is designed for friendly and easy installation. Slots and installation adapters are specially designed for GhostLab42 (Spongeface) light and sound boards. All holes are marked, and most of them are pre-drilled. The shell is 4mm thick, and 3D printed of AA Acrylic Acid, so sanding is not necessary and is ready for priming.

I am plan to make some available after I got the laser cut MB back. Don’t know if anyone here is interested?

Best regards,
Azuma

Image

Image

Image

Image

Image

Image

Image

Image

Image

Re: My newly created Proton Pack kits

Posted: September 17th, 2020, 6:53 am
by SP Productions
That is slick!

What price range are you looking at?

Sean

Re: My newly created Proton Pack kits

Posted: September 17th, 2020, 7:50 am
by doctorevil30564
that's a very nice looking 3D printed pack, I love how clean the prints are using that material.

If you want to sell them on gbfans remember you need to get set up to sell items here.

I think they will let you link to your etsy store or to ebay but not 100% sure if that is allowed.

Re: My newly created Proton Pack kits

Posted: September 17th, 2020, 9:32 am
by cristovalc
If I didn't just build a BenofKent pack is definately be interested. One of the best 3D printed versions I've seen! Good work

Re: My newly created Proton Pack kits

Posted: September 17th, 2020, 10:30 am
by Kingpin
Just a friendly reminder that as azuma doesn't yet possess a Supporting Membership, he would not be able to list items for sale here.

Re: My newly created Proton Pack kits

Posted: September 17th, 2020, 11:19 am
by kahuna900
OMG, please do whatever it takes to offer these up on the site. I've been thinking about building a full size pack and you seem to have hit all the correct marks.

Almost seems too good to be true!!!! :)

Re: My newly created Proton Pack kits

Posted: September 17th, 2020, 11:59 am
by jonogunn
I would love to know the price!!

Re: My newly created Proton Pack kits

Posted: September 17th, 2020, 8:59 pm
by AJ Quick
Make sure you get yourself setup with a Supporting Membership!

I'll be your first customer, because that thing looks AWESOME!

Re: My newly created Proton Pack kits

Posted: September 17th, 2020, 10:07 pm
by azuma
Thank you for your comments! I am still trying to figure out the cost of the pack to determine the price. Hopefully I can have the first batch made soon. Stay tunned.


Hi AJ,

How to be Supporting Membership? Thank you.

Best regards,
Azuma

Re: My newly created Proton Pack kits

Posted: September 18th, 2020, 12:51 am
by Pseudodonn7
“Oh, baby! You’re my number one Christmas gift item!”

Re: My newly created Proton Pack kits

Posted: September 18th, 2020, 1:30 am
by Kingpin
azuma wrote: September 17th, 2020, 10:07 pmHow to be Supporting Membership? Thank you.
You can become a Supporting Member by visiting this link: Supporting Membeship
:)

Re: My newly created Proton Pack kits

Posted: September 18th, 2020, 3:16 am
by Pseudodonn7
Do the spacers on the banjos line up easily for a straight fit on the bumper? I see a lot of people kind of fudge this a bit. I assume 3d printing this absolves errors like that but hey, I wanted to ask a question that potentially gives me more pictures. :p

Re: My newly created Proton Pack kits

Posted: September 18th, 2020, 4:45 am
by Mercifull
You've thought this through really well. Following this thread for progress and details.

I don't know much about Acrylic Acid 3d printing, does this mean you don't get print lines like with a FDM printer with PLA? Is this as good as cast parts?

Re: My newly created Proton Pack kits

Posted: September 18th, 2020, 10:31 pm
by azuma
Pseudodonn7 wrote: September 18th, 2020, 3:16 am Do the spacers on the banjos line up easily for a straight fit on the bumper? I see a lot of people kind of fudge this a bit. I assume 3d printing this absolves errors like that but hey, I wanted to ask a question that potentially gives me more pictures. :p
Not sure what do you mean? Anyway, here is the bumper installed with Metal Bellows purchased from GB fans shop.

Image

Re: My newly created Proton Pack kits

Posted: September 18th, 2020, 10:44 pm
by azuma
Mercifull wrote: September 18th, 2020, 4:45 am You've thought this through really well. Following this thread for progress and details.

I don't know much about Acrylic Acid 3d printing, does this mean you don't get print lines like with a FDM printer with PLA? Is this as good as cast parts?
My pack is printed by SLA (Stereolithography Apparatus) 3D printing technology, which prints smooth surface with hard to spot fine lines. Almost all prototypes of new toys are done by SLA these days. They are good as cast parts. According to the 3D printing firm, AA (Acrylic Acid) can stand up to 60°C (140 °Fahrenheit).

Azuma

Re: My newly created Proton Pack kits

Posted: September 19th, 2020, 12:27 am
by abritinthebay
good lord, you must have a very large SLA printer! What model are you using??

Re: My newly created Proton Pack kits

Posted: September 19th, 2020, 1:57 am
by azuma
abritinthebay wrote: September 19th, 2020, 12:27 am good lord, you must have a very large SLA printer! What model are you using??
The pack was printed at a professional printing house. The maximum size they can print is 80cm x 80cm :cool:
Azuma

Re: My newly created Proton Pack kits

Posted: September 19th, 2020, 4:33 am
by Mercifull
You could really be into something here. This is incredible detail for a 3D print I don’t think there’s any other builders selling anything like this.

If you are able to work out a cost that’s acceptable to you I’m sure there are interested buyers here.

Re: My newly created Proton Pack kits

Posted: September 19th, 2020, 8:53 am
by Dr.D
Sign. Me. Up.

Re: My newly created Proton Pack kits

Posted: September 20th, 2020, 12:40 pm
by Mercifull
I really like how so much of it slots and bolts together. I’m really exited by this concept. How durable is the material to knocks and bangs? 3D printed stuff can sometimes be quite brittle but I’m not as experienced in the particular material you’ve used. I hope you can work out the logistics of printing and shipping soon. Or perhaps you might consider just selling the models so that people can find a local resin 3D printing company that can build it.

I think as well you should consider adding some hidden “watermarks” as well, maybe in the inside of the shell or in areas where other things then bolt on and coverup. This may help deter re-casters from stealing your work.

Re: My newly created Proton Pack kits

Posted: September 22nd, 2020, 5:42 am
by azuma
the material is kinda like Resin. It is much stronger than PLA.

I like the idea of putting watermarks on the shell to prevent being copied.

Will get back on price estimation. Thank you so much for your inputs.

Azuma

Re: My newly created Proton Pack kits

Posted: September 23rd, 2020, 10:27 am
by Mercifull
I just worry that without any sort of watermarking or unique identifier that someone will try recasting and rip-off the work. The beauty of 3D printing is that these watermarks could be all over the place on the inside and in hidden areas to make it a lot harder to recast.

You might also want to reconsider those predrilled holes in the Hydrogen Gas Actuator so that builders have the choice on what style of pack to build. Alternatively, you could offer it as a configuration option I suppose.

While Stefan’s plans show the legris and clippard elbows in direct alignment, on the “Spengler” identified pack and also in the new Afterlife film they are misaligned.

Stefan ottos plans
Image

Afterlife screenshot from behind the scenes clip
Image

Re: My newly created Proton Pack kits

Posted: September 23rd, 2020, 11:40 am
by Marcus B
The way the reflectors and light kit fits in is genius.. Having just gotten through most of it with my Anovos pack... I wish I had been able to purchase this kit instead.

This could be the "standard" pack for most people when it becomes available. You'll still have people building accurate replicas, upgrading Spirit packs, etc.. but this is the one I think a lot of people would opt for if the price is right. It looks like a great platform to start with and upgrade as you want.

Re: My newly created Proton Pack kits

Posted: September 23rd, 2020, 12:12 pm
by Tommorris22
I agree this looks fantastic and was obviously engineered really well. I’d be happy to purchase the files to print myself or even if it’s offered as a kit, if the price is right I may consider it. Strong work

Re: My newly created Proton Pack kits

Posted: September 23rd, 2020, 12:54 pm
by mike_waclo
Marcus B wrote: September 23rd, 2020, 11:40 am The way the reflectors and light kit fits in is genius.. Having just gotten through most of it with my Anovos pack... I wish I had been able to purchase this kit instead.

This could be the "standard" pack for most people when it becomes available. You'll still have people building accurate replicas, upgrading Spirit packs, etc.. but this is the one I think a lot of people would opt for if the price is right. It looks like a great platform to start with and upgrade as you want.

Having also built an Anovos pack, I'm strongly considering buying this kit to upgrade my kit. :)

Re: My newly created Proton Pack kits

Posted: September 23rd, 2020, 8:28 pm
by azuma
I have my boy, who is 45kg/99lb, standing on the shell without problem, however, I don't know what would happen if he jumps on it. It could be a different story thou...

Image

My laser cut aluminum MB just came in. A four inches hole in the center is pre-cut for my speaker. It looks pretty nice to me.
Image

Un-drilled HGA could be an option as well.

Cheers,
Azuma

Re: My newly created Proton Pack kits

Posted: September 24th, 2020, 10:45 am
by davidkram2003
I’m definitely interested in one of these. Can’t wait to see the price.

Re: My newly created Proton Pack kits

Posted: September 24th, 2020, 3:27 pm
by Dove
I'm watching too!

Re: My newly created Proton Pack kits

Posted: September 25th, 2020, 6:50 am
by jkolton
Also VERY interested! Excellent work!

Re: My newly created Proton Pack kits

Posted: September 25th, 2020, 10:42 am
by Carldacorte
Azuma! You aren’t by chance the Azuma who makes the AMAZING Indy shirts are you? I see an Indy bag peeking out in your last picture :)

If so, I just ordered a shirt from you and can’t wait to receive it!