[jconway2002]

I took my Spirit my spirit trap apart to add some 3D printed mods, now when reassembling it, I cant seem to get the green lights to come on when the doors open. If I take the trap back apart the lights work fine, so it seems that when I install the handle, the toggle button/ post are pressing down slightly on the door triggers, which is causing the electronic switch that controls the green lights not to activate. So, long story short: is there a specific method to reinstalling the handle?

Thanks.

[joezlo]

There is a white tiny part that goes in the trap handle before the long shaft the sits against the trap doors swing arms (the 2 back things that activate the sound and light contact) - But remember! The trap doors have to be open when you begin putting it back together when they butt up against the gears. Set the Button trigger and close them.

[jconway2002]

Thanks. I got everything back together and working alright, but I had to put a shim under the trap door electronic switch so that it would trigger when the doors open. Easy fix, but took a while to get there.