- October 11th, 2012, 8:08 am#417266
Several people have asked about a checklist similar to the Proton pack one for the Slimeblower. So lets start off and please feel free to add to it and we'll end up with a definitive list for those taking on the build. Mods if you could make this a sticky and allow people to edit it?
Pack:
Alice pack frame
Aluminum fitting bracket
Aluminum cross braces x 2
Main tank mount x 1 (1/8" x 4" x 15" approx.)
Grey vest with chest plates
Aluminum mounting plates ( 1/4" square plate and 1/8" angled plate)
Aluminum pump boxes x 2
2' Aluminum tube spacer x 1 (1.5" long)
Suitable heatsinks for pump boxes x 2
Large main tank (grey) 9.5" x 36" tall
Small side tanks x 2 (green) 4" x 19.75" tall, 5" x 17.75" tall
5"- 6" Round ball (red)
Brass Fittings and 1/2" hose
hose clamps x 2
3/4" Parker brass fittings or suitable substitute (BST-6 x 2, BST-6M x 1, )
Set of spotlights (Variflex, Cateye or King Sword)
Project boxes x 2 (Bud #PS11327-G, #PS11521-G)
Box greeblies x 1 set
LED lenses (green domed, amber flat top, large green flat top)
Lower battery box x 1
Battery heatsink x 1
Split loom (3/8" ) 6 ft approx
Decal set x 1
Head rest x1
Gun:
Main gun tube, Aluminum or other suitable material (4.5" O.D) clamshell with hinge x 1
# 6 button head bolts
Nose cone x 1
Nozzle tip x1
End cap x1
#8 button head bolts
U- Handle, with bolt and plate x1
5" hose clamps x 2
Black control boxes x 2
Toggle switch x 1
Large green indicator light x1
Brass fittings x 2
Red tubing x 1
Shoulder strap with mounting rings and 1/4" p-clamps x1
Side discharge lever with AME grip x 1
3/4" Parker brass fittings or suitable substitute (BST-6 x 3)
Hoses:
Suitable hoses (1.5" OD - 2" OD) *preferably cloth covered
3/4" Parker brass fittings or suitable substitute (BST-N6M x 3)
Optional:
Light kit, Sound kit, speaker, amp
Pack:
Alice pack frame
Aluminum fitting bracket
Aluminum cross braces x 2
Main tank mount x 1 (1/8" x 4" x 15" approx.)
Grey vest with chest plates
Aluminum mounting plates ( 1/4" square plate and 1/8" angled plate)
Aluminum pump boxes x 2
2' Aluminum tube spacer x 1 (1.5" long)
Suitable heatsinks for pump boxes x 2
Large main tank (grey) 9.5" x 36" tall
Small side tanks x 2 (green) 4" x 19.75" tall, 5" x 17.75" tall
5"- 6" Round ball (red)
Brass Fittings and 1/2" hose
hose clamps x 2
3/4" Parker brass fittings or suitable substitute (BST-6 x 2, BST-6M x 1, )
Set of spotlights (Variflex, Cateye or King Sword)
Project boxes x 2 (Bud #PS11327-G, #PS11521-G)
Box greeblies x 1 set
LED lenses (green domed, amber flat top, large green flat top)
Lower battery box x 1
Battery heatsink x 1
Split loom (3/8" ) 6 ft approx
Decal set x 1
Head rest x1
Gun:
Main gun tube, Aluminum or other suitable material (4.5" O.D) clamshell with hinge x 1
# 6 button head bolts
Nose cone x 1
Nozzle tip x1
End cap x1
#8 button head bolts
U- Handle, with bolt and plate x1
5" hose clamps x 2
Black control boxes x 2
Toggle switch x 1
Large green indicator light x1
Brass fittings x 2
Red tubing x 1
Shoulder strap with mounting rings and 1/4" p-clamps x1
Side discharge lever with AME grip x 1
3/4" Parker brass fittings or suitable substitute (BST-6 x 3)
Hoses:
Suitable hoses (1.5" OD - 2" OD) *preferably cloth covered
3/4" Parker brass fittings or suitable substitute (BST-N6M x 3)
Optional:
Light kit, Sound kit, speaker, amp